Manual Tongs

Kelco type Tubing Tongs

Wrap-around Design with 300° Die Contact

Access Oil Tools manufactures a range of tubing and casing tongs from 3/4" through 7" made of high alloy steel and heat-treated for strength and wear. The tongs incorporate a wrap-around design with approximately 300° of die contact to minimize cutting or crushing of the pipe. All tongs are pull tested and documentation is available.

Forum™ Energy Technologies (formerly Access Oil Tools) - Smart Solutions & Powerful Products stocked by Oil Nation Inc., located in Houston, TX.

Find out more



Access Kelco type K-25 Tubing Manual Tong from Oil Nation Inc., the authorized distributor in Houston, TX.

Access K-25 Tubing Tong

The AOT K-25 Tubing Tong has a wide range from 1.050 thru 3.062, and is light-weight with a wrap around design providing approximately 300° die contact. This prevents crushing or cutting of thin wall tubing.

Size Range: 3/4" through 3 1/16"

 

 

Access Kelco type K-30 Tubing Manual Tong from Oil Nation Inc., the authorized distributor in Houston, TX.

Access K-30 Tubing Tong

The AOT K-30 Tubing Tong is Designed for heavy duty service of tubing 2.062” to 4.125” OD with a 5,000 ft.-lb. maximum torque rating. It has a wrap-around design with approximately a 300° die contact. This prevents cutting or crushing of thin wall tubing.

Size Range: 3/4" through 4 1/8"

 

Access Kelco type K-50 Tubing Manual Tong from Oil Nation Inc., the authorized distributor in Houston, TX.

Access K-50 Tubing Tong

The AOT K-50 Manual Tubing Tong is designed for heavy duty service for tubing and casing. It has a size range of 2 7/8” - 5 1/2” OD with a 7,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300° die contact to prevent cutting or crushing thin wall pipe.

Size Range: 2 3/8" through 5 1/2"

Access Kelco type K-50HT Tubing Manual Tong from Oil Nation Inc., the authorized distributor in Houston, TX

Access K-50 HT Tubing/Casing Tong

The AOT K-50 HT Manual Tong is designed for heavy duty service for tubing & casing. It has a size range of 2 3/8” - 5” OD with a 15,000 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300° die contact to prevent cutting or crushing of thin wall pipe.

Size Range: 2 3/8" through 5 1/2"

Access Kelco type K-70 Tubing Manual Tong from Oil Nation Inc., the authorized distributor in Houston, TX.

Access K-70 Tubing/Casing Tong

The AOT K-70 Manual Tong is designed for heavy duty service for tubing & casing. It has a size range of 3 1/2” - 7” OD with a 12,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300° die contact to prevent cutting or crushing of thin wall pipe.

Size Range: 5 1/2" through 7"

Top